The jaw crusher mainly relies on the jaw plate to crush and crush the ore. The jaws of the jaw crusher are divided into moving jaws and fixed jaws. The moving jaws are movable and plays an important role in the crushing of materials. Some users reported that there is a phenomenon in which the moving jaws cannot be swung during use. Why will this happen?
During the operation of the jaw crusher, if the moving jaw stop swinging after you heard a loud noise. The problems that cause the jaw crusher to oscillate mainly include the rotation of the flywheel, the swing of the connecting rod, and the slackening of the pull rod loose, which will effect the moving jaw stop swinging.
The jaw crushing motorized shovel cannot swing. The common reason is that the equipment falls into the non-broken object, which is other unrelated broken materials, in order that it causes the thrust plate to break or the rivet to break. If the lower part of the connecting rod is broken, The main reason is that the groove of the thrust plate supported by the lower part of the connecting rod appears the crack of the slider. Therefore, if the calculation is not performed properly during installation, it will cause the movement to not swing.